
                          Additional Information

                 Aztech CDA 268-03I CD-ROM DRIVE Ver 1.00


   This file contains additional information about the CD-ROM drive software 
   that was not available at printing time.


   Primary IDE Configuration
   =========================

   When connecting the CDA268-03I CD-ROM drive to the primary IDE controller
   (where the IDE hard disk was connected).  The IDE CD-ROM drive will always
   work as a Slave Drive, ensured that the IDE hard disk drive is configured 
   to its Master Mode by means of jumper settings (refer to the hard disk 
   manual for detail in the jumper settings); else, the IDE CD-ROM drive will
   not be able to work.



                        
                               --- End of File ---
